Care & Cleaning
Novano surfaces are engineered for long-lasting durability with minimal maintenance. Simple, routine care keeps your façades looking beautiful year after year, while protecting the surface finish and ensuring maximum lifespan. With just basic cleaning and occasional inspection, Novano delivers years of reliable performance without the demanding upkeep of traditional timber.
ROUTINE CLEANING BEST PRACTICES
Use warm water and a mild household dish soap (e.g. gentle washing-up liquid).
Lightly scrub using a soft-bristle brush.
Rinse loose debris first with a standard garden hose.
Avoid abrasive pads, scouring tools, or harsh cleaning agents.
No specialised cleaners or equipment are required for routine maintenance.
SPOT CLEANING FOR SPECIFIC ISSUES
Dirt & Debris
Rinse with a hose, scrub with warm soapy water and a soft brush.
Lime Scale (Hard Water Deposits)
Mix equal parts white vinegar and water. Spray or apply with a soft cloth. Allow to sit for 5-10 minutes for stubborn deposits, then wipe clean.
Oil, Grease, and Food Stains
Clean food spills as soon as possible, ideally within 7 days.
Rinse with a hose, then clean with warm, soapy water and gently scrub with a soft brush to remove any residue.
Mould & Mildew
Prevent buildup by removing pollen, dirt, and organic material regularly.
Clean with mild soapy water and a soft bristle brush to eliminate any growth.
PERIODIC INSPECTION & GENERAL MAINTENANCE
- Perform annual inspections of façades for potential damage.
- Look for any surface damage, scratches, or mechanical wear.
- In cases of heavier wear or surface damage, the affected area can be lightly sanded and refinished using the base primer and colour coating layer.
- Surfaces exposed to spray water or moisture accumulation should be properly sealed with Novano-approved coating.
- Refinishing is primarily recommended for aesthetic reasons, not structural integrity.
- Always use only Novano-approved primer and coating. Only these authorised surface treatments may be used to ensure full compatibility with Novano materials.
MAINTENANCE CARE IN HIGH-EXPOSURE AREAS
Areas exposed to constant spray, such as gable ends, overhangs, or water runoff zones, may benefit from additional sealing with the Novano-approved color coat system. This added protection helps reduce localised soiling and water staining over time.
These high-exposure surfaces should be sealed or periodically recoated using the Novano-approved color coat system to maintain optimal appearance and protection.
SAFETY INSTRUCTIONS & ENVIRONMENTAL CONSIDERATIONS
✓ Do not burn Novano products. Combustion may release harmful gases.
✓ Always store the products flat, fully covered, and in dry, ventilated conditions before installation.
✓ Avoid strong acidic, chlorinated, bleach-based, or solvent cleaners.
✓ Novano products are fully recyclable and environmentally responsible at end-of-life.
✓ Never use high-pressure washers on Novano surfaces.
QUICK REFERENCE: DOS & DON'TS
DOS | DON’TS |
✅Clean with mild soap and water | ❌Don’t use bleach or acetone |
✅Use soft-bristle brushes | ❌Don’t use abrasive pads or scouring tools |
✅Clean spills promptly | ❌Don’t delay cleaning food or oil stains |
✅Inspect surfaces annually | ❌Don’t use pressure washers |
✅Use Novano-approved finishes and treatments | ❌Don’t apply unapproved coatings |
CARE & CLEANING RESOURCES
Care & Cleaning Guidelines
Colour & Protection Concept
See It. Feel It. Build with Confidence.
Order your FREE samples and experience the texture, colour, and quality of our sustainable composite building materials, first-hand.
Get a closer look. Feel the difference. Choose with certainty.